Difference between revisions of "Metal Micro Lathe"

From MidsouthMakers - Memphis Area Hackerpace
Jump to navigation Jump to search
Line 54: Line 54:
 
== After each use ==
 
== After each use ==
 
=== Clean ===
 
=== Clean ===
*
+
* Clean chips
 +
* Check tools to see if they've been dulled
 +
* Rotate the inserts to a sharp side
 +
* Ensure ways are lightly lubricated to prevent rust
 +
* LOCK the "Precision Tools" tool box after returning all tools
 +
 
 
=== Replace ===
 
=== Replace ===
 
*
 
*

Revision as of 22:09, 7 October 2012

Metal Micro Lathe

Metal Lathe

Information
Owner Midsouth Makers
Tool Category Tool
Model Sherline 4400
Serial SP-48647
Cost 1,000,000
Status Missing parts
Availability Training required to use
Media

link to tool use guidesLink to the manual locationYouTube guides, tutorials, etc

QRCode

QR-7e51d04804a16171c75335ca2441897b.png



Location

The lathe is currently on it's dedicated work station in the Fab alcove in the shop.

Features

  • Manual Speed Control
  • Has stepper motors mounted
  • Inch pitch lead screw
  • 0.050" per turn

Recommended Safety Equipment

  • Safety Glasses
  • Face Shield (When parting)
  • NO LONG SLEEVES OR LOOSE CLOTHING

Prior to each use

Verify

  • Make sure that the machine is not loose on x or y and that the motor mount is secure
  • Your tools are sharp
  • Your work is clamped properly
  • If using a steady rest assure you're running within tolerance using a dial indicator
  • make sure your you're tram'd in within tolerances for your project

After each use

Clean

  • Clean chips
  • Check tools to see if they've been dulled
  • Rotate the inserts to a sharp side
  • Ensure ways are lightly lubricated to prevent rust
  • LOCK the "Precision Tools" tool box after returning all tools

Replace

Supplies/Consumables that will need to be replaced/purchased

Per Use information and/or rates

Periodic Replacements