Jferguson at 13:39, 25 May 2011

2011-05-25T13:39:13Z

← Older revision		Revision as of 13:39, 25 May 2011
Line 1:		Line 1:
			Main Article: [[MidsouthMakers_Webcams]]

	= Motion Threads =		= Motion Threads =
	* Each camera in motion (when more than 1) needs it's own thread<number>.conf file		* Each camera in motion (when more than 1) needs it's own thread<number>.conf file

Jferguson: Created page with "= Motion Threads = * Each camera in motion (when more than 1) needs it's own thread.conf file * /etc/motion/thread1.conf

 # /usr/local/etc/thread1.conf # # This con..."

2011-05-25T13:23:10Z

Created page with "= Motion Threads = * Each camera in motion (when more than 1) needs it's own thread<number>.conf file * /etc/motion/thread1.conf <pre> # /usr/local/etc/thread1.conf # # This con..."

New page

= Motion Threads =
* Each camera in motion (when more than 1) needs it's own thread<number>.conf file

* /etc/motion/thread1.conf
<pre>
# /usr/local/etc/thread1.conf
#
# This config file was generated by motion 3.2.12

###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video0

# The video input to be used (default: 8)
# Should normally be set to 1 for video/TV cards, and 8 for USB cameras
input 8

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 1

############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
target_dir /motion/1.camera.midsouthmakers.org

############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8081

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
;on_picture_save /usr/local/motion-extras/camparse1.pl

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# Filename of movie is appended as an argument for the command.
;on_movie_end /usr/local/motion-extras/mpegparse1.pl

</pre>

* /etc/motion/thread2.conf
<pre>
# /usr/local/etc/thread2.conf
#
# This config file was generated by motion 3.2.12

###########################################################
# Capture device options
############################################################

# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video1

# The video input to be used (default: 8)
# Should normally be set to 1 for video/TV cards, and 8 for USB cameras
input 8

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 2

############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
target_dir /motion/2.camera.midsouthmakers.org

############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8082

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
;on_picture_save /usr/local/motion-extras/camparse2.pl

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# Filename of movie is appended as an argument for the command.
;on_movie_end /usr/local/motion-extras/mpegparse2.pl
</pre>

* /etc/motion/thread3.conf
<pre>
# /usr/local/etc/thread3.conf
#
# This config file was generated by motion 3.2.12

###########################################################
# Capture device options
############################################################
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
netcam_url http://192.168.1.170/img/video.mjpeg

# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
; netcam_userpass value

# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1: Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
; netcam_http 1.0

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 3

############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
target_dir /motion/3.camera.midsouthmakers.org

############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8083

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
;on_picture_save /usr/local/motion-extras/camparse3.pl

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# Filename of movie is appended as an argument for the command.
;on_movie_end /usr/local/motion-extras/mpegparse3.pl
</pre>

* /etc/motion/thread4.conf
<pre>
# /usr/local/etc/thread3.conf
#
# This config file was generated by motion 3.2.12

###########################################################
# Capture device options
############################################################
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
netcam_url http://192.168.1.171/img/video.mjpeg

# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
; netcam_userpass value

# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1: Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
; netcam_http 1.0

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 4

############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
target_dir /motion/4.camera.midsouthmakers.org

############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8084

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
;on_picture_save /usr/local/motion-extras/camparse3.pl

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# Filename of movie is appended as an argument for the command.
;on_movie_end /usr/local/motion-extras/mpegparse3.pl
</pre>

* /etc/motion/thread5.conf
<pre>
# /usr/local/etc/t:wqhread3.conf
#
# This config file was generated by motion 3.2.12

###########################################################
# Capture device options
############################################################
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
netcam_url http://192.168.1.172/img/video.mjpeg

# Username and password for network camera (only if required). Default: not defined
# Syntax is user:password
; netcam_userpass value

# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request.
# keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# 1.1: Use HTTP/1.1 requests that support keep alive as default.
# Default: 1.0
; netcam_http 1.0

# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value

# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off

# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 5

############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = thread (camera) number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################

# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
target_dir /motion/5.camera.midsouthmakers.org

############################################################
# Live Webcam Server
############################################################

# The mini-http server listens to this port for requests (default: 0 = disabled)
webcam_port 8085

# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
;on_picture_save /usr/local/motion-extras/camparse3.pl

# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# Filename of movie is appended as an argument for the command.
;on_movie_end /usr/local/motion-extras/mpegparse3.pl
</pre>

Motion Threads - Revision history

Jferguson at 13:39, 25 May 2011

Jferguson: Created page with "= Motion Threads = * Each camera in motion (when more than 1) needs it's own thread.conf file * /etc/motion/thread1.conf
# /usr/local/etc/thread1.conf # # This con..."