Rfid Access - Revision history

Jferguson at 20:51, 22 April 2016

2016-04-22T20:51:06Z

← Older revision		Revision as of 20:51, 22 April 2016
Line 12:		Line 12:

	====Via the Web Interface====		====Via the Web Interface====

			To Access the web interface add this to your hosts file: 192.168.1.11 rfid-php

			Then access the site via: http://rfid-php

	===Delete user===		===Delete user===

Bseishen: /* Source Code */

2013-07-15T17:11:22Z

Source Code

← Older revision		Revision as of 17:11, 15 July 2013
Line 23:		Line 23:
	==Technical Details==		==Technical Details==
	===Source Code===		===Source Code===
	All Code is located on a github ~~repositor~~ located at: https://github.com/bseishen/rfid_authentication/		All Code is located on a github repository located at: https://github.com/bseishen/rfid_authentication/

	===Wiegand Reader===		===Wiegand Reader===
	Reader is a 26bit Chinese special. MSB and LSB are parity bits, the remainging 24bits are the LSB of the RFID token. Couple of gotcha's with this reader. Numeric key presses are sent without parity and are only 16bits. Also buzzer lines or status led cannot be held low when trying to read data from the reader.		Reader is a 26bit Chinese special. MSB and LSB are parity bits, the remainging 24bits are the LSB of the RFID token. Couple of gotcha's with this reader. Numeric key presses are sent without parity and are only 16bits. Also buzzer lines or status led cannot be held low when trying to read data from the reader.

Bseishen: /* Technical Details */

2013-07-15T17:11:11Z

Technical Details

← Older revision		Revision as of 17:11, 15 July 2013
Line 22:		Line 22:

	==Technical Details==		==Technical Details==
			===Source Code===
			All Code is located on a github repositor located at: https://github.com/bseishen/rfid_authentication/
	===Wiegand Reader===		===Wiegand Reader===
	Reader is a 26bit Chinese special. MSB and LSB are parity bits, the remainging 24bits are the LSB of the RFID token. Couple of gotcha's with this reader. Numeric key presses are sent without parity and are only 16bits. Also buzzer lines or status led cannot be held low when trying to read data from the reader.		Reader is a 26bit Chinese special. MSB and LSB are parity bits, the remainging 24bits are the LSB of the RFID token. Couple of gotcha's with this reader. Numeric key presses are sent without parity and are only 16bits. Also buzzer lines or status led cannot be held low when trying to read data from the reader.

Bseishen: /* Overview */

2013-07-15T17:07:35Z

Overview

← Older revision		Revision as of 17:07, 15 July 2013
Line 1:		Line 1:
	== Overview ==		== Overview ==
			Midsouthmakers RFID access based on a Beagle Bone Black and a cheap Chinese wiegand reader.

	== How To ==		== How To ==

Bseishen: /* Pin Assignements */

2013-07-15T17:04:02Z

Pin Assignements

← Older revision		Revision as of 17:04, 15 July 2013
Line 34:		Line 34:
	*Relay 7 - GPIO_46 - UNASSIGNED		*Relay 7 - GPIO_46 - UNASSIGNED
	*Relay 8 - GPIO_47 - Strobe		*Relay 8 - GPIO_47 - Strobe
			*GPIO_68 - Wiegand D0
	GPIO_68 - Wiegand D0		*GPIO_69 - Wiegand D1
	GPIO_69 - Wiegand D1		*GPIO_02 - 1 wire for temperature sensor

	GPIO_02 - 1 wire for temperature sensor

Bseishen at 17:03, 15 July 2013

2013-07-15T17:03:22Z

@@ Line 3: / Line 3: @@
 == How To ==
 ===Add user===
 ====Via the Keypad====
 *Scan rfid token and enter your 4 digit pin.
 *Press the enter key. Light will flash green and beep once completed. This will enter add user mode. Esc can be hit to exit this mode.
@@ Line 19: / Line 19: @@
 *Scan the new RFID token, and have user enter a 4 digit pin.
 *Light will flash green and beep once completed successfully.

Bseishen at 16:48, 15 July 2013

2013-07-15T16:48:21Z

← Older revision		Revision as of 16:48, 15 July 2013
Line 9:		Line 9:
	*Scan the new RFID token, and have user enter a 4 digit pin.		*Scan the new RFID token, and have user enter a 4 digit pin.
	*Light will flash green and beep once completed successfully.		*Light will flash green and beep once completed successfully.

			====Via the Web Interface====

	===Delete user===		===Delete user===

Bseishen: /* Via the Keypad */

2013-07-15T16:16:12Z

Via the Keypad

← Older revision		Revision as of 16:16, 15 July 2013
Line 14:		Line 14:
	====Via the Keypad====		====Via the Keypad====
	*Scan rfid token and enter your 4 digit pin.		*Scan rfid token and enter your 4 digit pin.
	*Press the ~~enter~~ key. Light will flash green and beep once completed. This will enter add user mode. Esc can be hit to exit this mode.		*Press the ESC key. Light will flash green and beep once completed. This will enter add user mode. Esc can be hit to exit this mode.
	*Scan the new RFID token, and have user enter a 4 digit pin.		*Scan the new RFID token, and have user enter a 4 digit pin.
	*Light will flash green and beep once completed successfully.		*Light will flash green and beep once completed successfully.

Bseishen: Space's Rfid Acess system

2013-07-15T16:11:54Z

Space's Rfid Acess system

New page

== Overview ==

== How To ==
===Add user===
====Via the Keypad====
You must be a part of the administrator group to add users.
*Scan rfid token and enter your 4 digit pin.
*Press the enter key. Light will flash green and beep once completed. This will enter add user mode. Esc can be hit to exit this mode.
*Scan the new RFID token, and have user enter a 4 digit pin.
*Light will flash green and beep once completed successfully.

===Delete user===
You must be a part of the administrator group to add users.
====Via the Keypad====
*Scan rfid token and enter your 4 digit pin.
*Press the enter key. Light will flash green and beep once completed. This will enter add user mode. Esc can be hit to exit this mode.
*Scan the new RFID token, and have user enter a 4 digit pin.
*Light will flash green and beep once completed successfully.