Marvin Prusa RepRap

From MidsouthMakers - Memphis Area Hackerpace
Revision as of 01:32, 1 August 2011 by Orias (talk | contribs) (Created page with "{{Infobox project |project_name = Prusa RepRap (Marvin) |image = |caption = |owner = Orias |version = 1.0 |status = in progress |start_date = Jan 2011 |cost = ~$500 }} == Ove...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Prusa RepRap (Marvin)
Owner Orias
Version 1.0
Status In Progress
Started On January 2011
Cost ~$500


Thanks to Dan9186 and Os1r1s, I've been working on building my own 3D printer. It's a Prusa RepRap, which I've taken to calling Marvin.

Completed Upgrades


  • The Z-Axis couplers broke on me several times. I tried both the stock Prusa couplers and the "Beefier Z-Axis" coupler, which started to break as well. The solution? a 2" section of automotive air hose and some hose clamps. Several prints in, they're still going strong. eventually they will need to be replaced, but it's a really cheap, effective solution.