File:Sherline 4400 Metal Working Lathe On Bench.jpg

Original file ‎(2,848 × 1,892 pixels, file size: 1.9 MB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	06:55, 8 October 2012		2,848 × 1,892 (1.9 MB)	Dan9186 (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D90
Exposure time	1/20 sec (0.05)
F Number	f/3.8
Date and time of data generation	02:31, 3 October 2012
Lens focal length	22 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	GIMP 2.6.11
File change date and time	01:54, 8 October 2012
Y and C positioning	Co-sited
Exposure Program	Shutter priority
Exif version	2.21
Date and time of digitizing	02:31, 3 October 2012
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX exposure bias	0
Maximum land aperture	3.8 APEX (f/3.73)
Metering mode	Spot
Light source	Unknown
Flash	Flash did not fire
DateTime subseconds	00
DateTimeOriginal subseconds	00
DateTimeDigitized subseconds	00
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	33 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown
GPS tag version	2.2.0.0