Difference between revisions of "Laser cutter"
Jump to navigation
Jump to search
(45 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | + | {{Infobox tool inventory | |
− | + | |tool_name = Laser Cutter | |
+ | |image = LaserCutter.jpg | ||
+ | |image_size = | ||
+ | |alt = | ||
+ | |caption = | ||
+ | |owner = Midsouth Makers | ||
+ | |category = CNC | ||
+ | |model = Redsail X700 | ||
+ | |serial = | ||
+ | |status = available | ||
+ | |availability = training | ||
+ | |talk_to = A Board Member | ||
+ | |purchase_date = 10/2014 | ||
+ | |disposal_date = | ||
+ | |cost = 5000 | ||
+ | |dnh = yes | ||
+ | |rtfm = yes | ||
+ | |guides = | ||
+ | |manuals = http://wiki.midsouthmakers.org/images/0/00/Redsail_Laser_Engraver_M700.pdf | ||
+ | }} | ||
== Location == | == Location == | ||
− | The big red | + | The two big red things in the Nerdery. |
== Features == | == Features == | ||
Line 28: | Line 47: | ||
*Place the wire back into the flame and burn the plastic. If the flame is blue/green the material is not safe and will emit chlorine gas when cut. | *Place the wire back into the flame and burn the plastic. If the flame is blue/green the material is not safe and will emit chlorine gas when cut. | ||
− | ==Materials== | + | ==Approved Materials== |
'''Note: If the material you want to cut isn't listed on this page, email the mailing list.''' | '''Note: If the material you want to cut isn't listed on this page, email the mailing list.''' | ||
{| class="wikitable" | {| class="wikitable" | ||
− | ! Material !! Safe to use with a laser cutter? !! Can you cut it? !! Can you engrave it? | + | ! Material !! Safe to use with a laser cutter? !! Can you cut it? !! Can you engrave it? !! Notes |
|- | |- | ||
| Acrylic || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || <span style="color:#009900">Yes</span> | | Acrylic || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || <span style="color:#009900">Yes</span> | ||
Line 39: | Line 58: | ||
|- | |- | ||
| Paper/Cardboard || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || Difficult | | Paper/Cardboard || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || Difficult | ||
+ | |- | ||
+ | | Foamcore Board || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || Difficult || <span style="color:red">1/4" maximum thickness!</span> | ||
+ | |- | ||
+ | | Craft Foam/Foamies || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || Difficult || <span style="color:red">use quick speeds, low power</span> | ||
+ | |- | ||
+ | | Vegetable Tanned leather || <span style="color:#009900">Safe!</span> || <span style="color:#009900">Yes</span> || <span style="color:#009900">Yes</span> | ||
|- | |- | ||
| Steel || <span style="color:#009900">Safe!</span> || No || <span style="color:#009900">Yes (oxidize)</span> | | Steel || <span style="color:#009900">Safe!</span> || No || <span style="color:#009900">Yes (oxidize)</span> | ||
|- | |- | ||
| Titanium || <span style="color:#009900">Safe!</span> || No || Yields a rainbow of colors depending on power. | | Titanium || <span style="color:#009900">Safe!</span> || No || Yields a rainbow of colors depending on power. | ||
+ | |- | ||
+ | | Anodized aluminum || <span style="color:#009900">Safe!</span> || No || <span style="color:#009900">Yes (removes anodization)</span> | ||
|- | |- | ||
| All other metals || <span style="color:#009900">Safe!</span> || No || Yes, if you use Cermark or other marking chemical. | | All other metals || <span style="color:#009900">Safe!</span> || No || Yes, if you use Cermark or other marking chemical. | ||
|- | |- | ||
| Glass || <span style="color:#AAAA00">Mostly safe, don't breathe the glass dust.</span> || No || <span style="color:#009900">Yes</span> | | Glass || <span style="color:#AAAA00">Mostly safe, don't breathe the glass dust.</span> || No || <span style="color:#009900">Yes</span> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
+ | |||
+ | ==Disallowed Materials== | ||
+ | '''Under NO circumstances should the following materials be cut on the laser cutter:''' | ||
+ | *Nylon | ||
+ | *ABS | ||
+ | *Polyethylene | ||
+ | *Lexan/Polycarbonate | ||
+ | *PVC | ||
+ | *Vinyl | ||
+ | *Teflon/PTFE | ||
+ | *CF/Carbon Fiber | ||
+ | *Foamcore Board >1/4" thick | ||
== Feeds and Speeds == | == Feeds and Speeds == | ||
Line 71: | Line 94: | ||
{| class="wikitable" | {| class="wikitable" | ||
+ | ! Material | ||
+ | ! Power (%) | ||
+ | ! Speed (mm/s) | ||
+ | ! Notes | ||
|- | |- | ||
− | | | + | | Acrylic (1/8in) |
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
| | | | ||
| | | | ||
|- | |- | ||
− | | 1/2in | + | | Acrylic (1/4in) |
+ | | 100% | ||
+ | | 10 mm/s | ||
+ | | | ||
+ | |- | ||
+ | | Acrylic (1/2in) | ||
| | | | ||
| | | | ||
| | | | ||
|- | |- | ||
− | | 3/4in | + | | EVA Foam (~1/8in) |
− | | | + | | 40% |
− | | | + | | 75mm/s |
+ | | | ||
+ | |- | ||
+ | | Foam Poster Board (3/16in) | ||
+ | | 25% | ||
+ | | 100mm/s | ||
+ | | | ||
+ | |- | ||
+ | | MDF (1/4in) | ||
+ | | 100% | ||
+ | | 6 mm/s | ||
+ | | | ||
+ | |- | ||
+ | | Poster Board | ||
+ | | 45% | ||
+ | | 150mm/s | ||
+ | | | ||
+ | |- | ||
+ | | Vegetable-Tanned Leather (~1.5mm) | ||
+ | | 40% | ||
+ | | 50mm/s | ||
| | | | ||
|- | |- | ||
− | | | + | | Wood (5mm) |
− | | | + | | 55% |
− | | | + | | 10mm/s |
| | | | ||
|- | |- | ||
− | | 1/4in | + | | Wood (1/4in) |
− | | | + | | 95% |
− | | | + | | 15mm/s |
| | | | ||
|- | |- | ||
− | | 1/2in | + | | Wood (1/2in) |
− | | | + | | 75% |
− | | | + | | 3mm/s |
| | | | ||
|} | |} | ||
Line 110: | Line 157: | ||
===Engraving=== | ===Engraving=== | ||
+ | {| class="wikitable" | ||
+ | ! Material | ||
+ | ! Power (%) | ||
+ | ! Speed (mm/s) | ||
+ | ! Notes | ||
+ | |- | ||
+ | | Wood | ||
+ | | 23% | ||
+ | | 300mm/s | ||
+ | | 0.2mm Depth | ||
+ | |- | ||
+ | | Acrylic | ||
+ | | 30% | ||
+ | | 20mm/s | ||
+ | | 3.5mm Depth | ||
+ | |- | ||
+ | | Acrylic | ||
+ | | 30% | ||
+ | | 50mm/s | ||
+ | | 1.3mm Depth | ||
+ | |- | ||
+ | | Acrylic | ||
+ | | 30% | ||
+ | | 100mm/s | ||
+ | | 0.5mm Depth | ||
+ | |- | ||
+ | | Acrylic | ||
+ | | 30% | ||
+ | | 150mm/s | ||
+ | | 0.3mm Depth | ||
+ | |- | ||
+ | | Foam Poster Board | ||
+ | | 15% | ||
+ | | 250mm/s | ||
+ | | Surface drawing | ||
+ | |- | ||
+ | | Foam Poster Board | ||
+ | | 27% | ||
+ | | 160mm/s | ||
+ | | 3/32in Depth (half way on 3/16 foam board) | ||
+ | |- | ||
+ | | Glass | ||
+ | | 20% | ||
+ | | 20% | ||
+ | | Clean scan|cut lines | ||
+ | |- | ||
+ | | Glass | ||
+ | | 20% | ||
+ | | 40% | ||
+ | | Clean scan|cut lines | ||
+ | |- | ||
+ | | Vegetable-tanned Leather | ||
+ | | 30% | ||
+ | | 300mm/s | ||
+ | | | ||
+ | |} | ||
+ | == Maintenance == | ||
+ | *Every 8 hours of run time, lenses/mirrors need to be checked/cleaned. | ||
+ | **Lense/Mirror can easily be scratched and/or damaged. Cleaning should be done by qualified personnel. | ||
+ | **http://www.ophiropt.com/user_files/co2/co2_optics_cleaning_data_sheet.pdf | ||
− | == | + | ===Maintenance Log=== |
+ | *11/16/2014 Laser Init. | ||
+ | *11/17/2014 Alignment and lens cleaning | ||
+ | *12/08/2014 Booster and external ventilation completed. | ||
+ | *05/01/2016 Cleaned Mirrors/lens | ||
+ | *05/02/2016 Laser realigned | ||
== Consumables == | == Consumables == | ||
− | *Mirrors $ | + | *Mirrors/Lenses. They are replaced when worn/scratched/damaged $160 |
− | *Laser Tube $ | + | *Laser Tube. 3,000 HR runtime. $410 |
=Authorized Users= | =Authorized Users= | ||
− | * | + | See list located in space |
− | * | + | |
+ | == Authorization Course == | ||
+ | * We provide laser cutter usage lessons a couple of times a year. | ||
+ | * Those who take this class and successfully complete it become authorized users of the cutter | ||
+ | * Upcoming courses will be announced via our [http://www.meetup.com/MidsouthMakers Meetup page] | ||
+ | * Slide Deck for Authorization Course can be found [https://docs.google.com/presentation/d/1eooGLYwM294R15i5imYVJsfvWOU_ttipIfkLIBPlsFA/edit?usp=sharing here] |
Latest revision as of 13:58, 4 August 2022
Laser cutter | |
---|---|
Information | |
Owner | Midsouth Makers |
Tool Category | Tool |
Model | Redsail X700 |
Purchased On | 10/2014 |
Cost | 5000 |
Status | Available |
Availability | Training required to use |
Labels | |
Media | |
QRCode | |
This tool is to be only used by authorized users. If you wish to learn how to use this tool please contact one of the authorized individuals. |
Questions? Talk to A Board Member for help or more information. |
Location
The two big red things in the Nerdery.
Features
- Red Sail X700
- 60 watt
- Water cooled
- 700mm x 500mm cut area
Safety
- Never let the machine run unattended especially when its cutting!
- Always use approved materials. Some materials can release chlorine gas or catch fire.
- Remember to pull bed leveling knob before running a job.
- Run the machine with the interlock on. The interlock is a key switch that will override the option to turn the laser off when the door is opened.
If a fire Occurs
- Immediately stop the laser, this will more than likely extinguish the fire.
- If fire still exist, try to blow it out.
- If fire still exist, spritz it with the water bottle. Notify the board.
- All else fails, use the fire extinguisher. Notify board.
Testing Plastics for Chlorine
A blow torch and copper wire will be needed for the test.
- With a pair of pliers heat up the end of the copper wire and burn off any residue.
- While still hot, touch a sample piece of the plastic you would like to cut with the hot end of the copper wire.
- Place the wire back into the flame and burn the plastic. If the flame is blue/green the material is not safe and will emit chlorine gas when cut.
Approved Materials
Note: If the material you want to cut isn't listed on this page, email the mailing list.
Material | Safe to use with a laser cutter? | Can you cut it? | Can you engrave it? | Notes |
---|---|---|---|---|
Acrylic | Safe! | Yes | Yes | |
Wood | Safe! | Yes | Yes | |
Paper/Cardboard | Safe! | Yes | Difficult | |
Foamcore Board | Safe! | Yes | Difficult | 1/4" maximum thickness! |
Craft Foam/Foamies | Safe! | Yes | Difficult | use quick speeds, low power |
Vegetable Tanned leather | Safe! | Yes | Yes | |
Steel | Safe! | No | Yes (oxidize) | |
Titanium | Safe! | No | Yields a rainbow of colors depending on power. | |
Anodized aluminum | Safe! | No | Yes (removes anodization) | |
All other metals | Safe! | No | Yes, if you use Cermark or other marking chemical. | |
Glass | Mostly safe, don't breathe the glass dust. | No | Yes |
Disallowed Materials
Under NO circumstances should the following materials be cut on the laser cutter:
- Nylon
- ABS
- Polyethylene
- Lexan/Polycarbonate
- PVC
- Vinyl
- Teflon/PTFE
- CF/Carbon Fiber
- Foamcore Board >1/4" thick
Feeds and Speeds
Different materials and thicknesses will require different cut speed and power. Table below is a good starting point for some common materials.
Cutting
Material | Power (%) | Speed (mm/s) | Notes |
---|---|---|---|
Acrylic (1/8in) | |||
Acrylic (1/4in) | 100% | 10 mm/s | |
Acrylic (1/2in) | |||
EVA Foam (~1/8in) | 40% | 75mm/s | |
Foam Poster Board (3/16in) | 25% | 100mm/s | |
MDF (1/4in) | 100% | 6 mm/s | |
Poster Board | 45% | 150mm/s | |
Vegetable-Tanned Leather (~1.5mm) | 40% | 50mm/s | |
Wood (5mm) | 55% | 10mm/s | |
Wood (1/4in) | 95% | 15mm/s | |
Wood (1/2in) | 75% | 3mm/s |
Engraving
Material | Power (%) | Speed (mm/s) | Notes |
---|---|---|---|
Wood | 23% | 300mm/s | 0.2mm Depth |
Acrylic | 30% | 20mm/s | 3.5mm Depth |
Acrylic | 30% | 50mm/s | 1.3mm Depth |
Acrylic | 30% | 100mm/s | 0.5mm Depth |
Acrylic | 30% | 150mm/s | 0.3mm Depth |
Foam Poster Board | 15% | 250mm/s | Surface drawing |
Foam Poster Board | 27% | 160mm/s | 3/32in Depth (half way on 3/16 foam board) |
Glass | 20% | 20% | cut lines |
Glass | 20% | 40% | cut lines |
Vegetable-tanned Leather | 30% | 300mm/s |
Maintenance
- Every 8 hours of run time, lenses/mirrors need to be checked/cleaned.
- Lense/Mirror can easily be scratched and/or damaged. Cleaning should be done by qualified personnel.
- http://www.ophiropt.com/user_files/co2/co2_optics_cleaning_data_sheet.pdf
Maintenance Log
- 11/16/2014 Laser Init.
- 11/17/2014 Alignment and lens cleaning
- 12/08/2014 Booster and external ventilation completed.
- 05/01/2016 Cleaned Mirrors/lens
- 05/02/2016 Laser realigned
Consumables
- Mirrors/Lenses. They are replaced when worn/scratched/damaged $160
- Laser Tube. 3,000 HR runtime. $410
Authorized Users
See list located in space
Authorization Course
- We provide laser cutter usage lessons a couple of times a year.
- Those who take this class and successfully complete it become authorized users of the cutter
- Upcoming courses will be announced via our Meetup page
- Slide Deck for Authorization Course can be found here