Difference between revisions of "Hydraulic jack letterpress"
(→Bill of Materials: updated to use new template) |
|||
| Line 28: | Line 28: | ||
{{bom-row | {{bom-row | ||
| item = Birch Plywood | | item = Birch Plywood | ||
| − | |||
| metric = {{in to cm|3/4|abbr=yes}} x {{ft to m|2|abbr=yes}} x {{ft to m|4|abbr=yes}} | | metric = {{in to cm|3/4|abbr=yes}} x {{ft to m|2|abbr=yes}} x {{ft to m|4|abbr=yes}} | ||
| cost = 15.76 | | cost = 15.76 | ||
| Line 36: | Line 35: | ||
{{bom-row | {{bom-row | ||
| item = Two by Four | | item = Two by Four | ||
| − | |||
| metric = {{in to cm|2|abbr=yes}} x {{in to cm|4|abbr=yes}} x {{in to cm|104|abbr=yes}} | | metric = {{in to cm|2|abbr=yes}} x {{in to cm|4|abbr=yes}} x {{in to cm|104|abbr=yes}} | ||
| cost = 2.45 | | cost = 2.45 | ||
Revision as of 07:50, 23 February 2010
The Hydraulic Jack Letterpress is a press designed to deboss designs into paper much like old movable type letterpresses.
| Hydraulic Jack Letterpress | |
|---|---|
| Information | |
| Owner | Dan9186 |
| Version | 1.0 |
| Status | In Progress |
| Started On | 2010-01-31 |
| Cost | $120 |
Overview
This project is the result of my fiancee wanting to have nicely made letterpress invitations to our wedding. Upon looking up the prices for such types of invitations, we were looking at about $900 to $1000 for just 100 invitations. As we started to look into it we realized that we could do this much cheaper on our own. All that was needed was the plates with the design, the ink, and something to press them with. Looking online for others' attempts, we found several where people had simply made them out of wood and were using leverage and their own weight to press them. We decided that we could make something similar with a few improvements, mainly the hydraulic portion to improve how even it is.
Features
Implemented
- Hydraulic jack for pressing force
- Made from simple hardware store pieces
- Acrylic sheet with 1"x1" registration marks
Incomplete
- Means of quickly inserting/removing printing plate and paper
Bill of Materials
| Item | Metric | Cost/Item | Qty | Sub Total | Distributor |
|---|---|---|---|---|---|
| Birch Plywood | 3/4 in (1.9 cm) x 2 ft (0.61 m) x 4 ft (1.2 m) | $15.76 | 1 | $15.76 | Lowe's |
| Two by Four | 2 in (5.1 cm) x 4 in (10 cm) x 104 in (264 cm) | $2.45 | 1 | $2.45 | Lowe's |
| Hydraulic Jack | 6 Ton | $16.99 | 1 | $16.99 | Harbor Freight Tools |
| Bungee Tie Down | N/A | $1.39 | 2 | $2.78 | Harbor Freight Tools |
| Hex Bolt | 5/16 in (0.8 cm) x 4.5 in (11 cm) | $0.50 | 8 | $4.00 | Home Depot |
| Hex Nut | 5/16 in (0.8 cm) | $0.10 | 8 | $0.80 | Home Depot |
| Cut Washer | 5/16 in (0.8 cm) | $0.11 | 16 | $1.76 | Home Depot |
| Lock Washer | 5/16 in (0.8 cm) | $0.16 | 16 | $2.56 | Home Depot |
| Metal Fence Post Cap | 4 in (10 cm) x 4 in (10 cm) | $7.54 | 1 | $7.54 | Home Depot |
| Small Tie Plate | N/A | $0.50 | 2 | $1.00 | Home Depot |
| Acrylic Sheet | 3/32 in (0.2 cm) x 18 in (46 cm) x 24 in (61 cm) | $9.77 | 1 | $9.77 | Home Depot |
| Corner Bracket | N/A | $2.98 | 4 | $11.92 | Lowe's |
| Slotted Angle | N/A | $9.23 | 2 | $18.46 | Lowe's |