Intro to Soldering: Difference between revisions
→Components: updating to contain the other items needed |
|||
| Line 88: | Line 88: | ||
| quantity = 1 | | quantity = 1 | ||
| distributor = Mouser | | distributor = Mouser | ||
}} | |||
{{bom-row | |||
| item = [http://www.mouser.com/ProductDetail/Murata/RPEF51H104Z2K1A03B/?qs=sGAEpiMZZMuAYrNc52CMZKct9tSo57EF9n5ZqqktZFU%3d Multi Layer Ceramic Capacitor] | |||
| metric = 0.1 uF | |||
| cost = 0.07 | |||
| quantity = 1 | |||
| distributor = Mouser | |||
}} | |||
{{bom-row | |||
| item = [http://www.mouser.com/ProductDetail/Switchcraft/RAPC722X/?qs=sGAEpiMZZMsUzhEcHltCuRYlx0yK05hp DC Power Connector] | |||
| metric = 2.1 mm (Female) | |||
| cost = 1.29 | |||
| quantity = 1 | |||
| distributor = Mouser | |||
}} | |||
{{bom-row | |||
| item = [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=S7006-ND Female Header] | |||
| metric = 1x8 Pin | |||
| cost = 0.7 | |||
| quantity = 2 | |||
| distributor = DigiKey | |||
}} | |||
{{bom-row | |||
| item = [http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=PPTC061LFBN-RC Female Header] | |||
| metric = 1x6 Pin | |||
| cost = 0.56 | |||
| quantity = 1 | |||
| distributor = DigiKey | |||
}} | |||
{{bom-row | |||
| item = Male Header | |||
| metric = 1x6 Pin | |||
| cost = 0 | |||
| quantity = 1 | |||
| distributor = | |||
}} | |||
{{bom-row | |||
| item = Male Header | |||
| metric = 2x3 Pin | |||
| cost = 0 | |||
| quantity = 1 | |||
| distributor = | |||
}} | }} | ||
{{bom-end}} | {{bom-end}} | ||
'''Total: ''' ${{format price| | '''Total: ''' ${{format price| 8.52}} | ||
== Tools == | == Tools == | ||
Revision as of 22:20, 12 August 2010
 |
This workshop has an archive of past instructions. If you wish to view the contents of those workshops, please look there. |
| Intro to Soldering | |
|---|---|
| |
| Information | |
| Location | CBU |
 |
This workshop is being redone with the addition of an option precursor workshop. Look for changes in the near future. |
Overview
The purpose of this workshop is to educate individuals on how to solder by means of soldering together a predesignated circuit. This does not include the wiring of the circuit, but merely the soldering of the components into a board with the circuit already etched onto it. The circuit board will come from either the Intro to Etching workshop, or bought as a prefabbed board.
Components
| Item | Metric | Cost/Item | Qty | Sub Total | Distributor |
|---|---|---|---|---|---|
| Component Socket | 28 Pin | $0.30 | 1 | $0.30 | Mouser |
| Crystal Oscillator | 16 MHz | $0.55 | 1 | $0.55 | Mouser |
| Resistor | 1 KOhm 1/4 Watt | $0.05 | 1 | $0.05 | Mouser |
| Switch | Momentary Push Switch | $0.13 | 1 | $0.13 | Mouser |
| LM7805 | 5V Regulator | $0.35 | 1 | $0.35 | Mouser |
| Ceramic Disk Capacitor | 22 pF | $0.06 | 2 | $0.12 | Mouser |
| Ceramic Disk Capacitor | 0.01 uF or 10 nF | $0.10 | 1 | $0.10 | Mouser |
| Electrolytic Capacitor | 22 uF | $0.02 | 1 | $0.02 | Mouser |
| ATMega328 Microcontroler | 28Pin (Unbootloaded) | $4.28 | 1 | $4.28 | Mouser |
| Multi Layer Ceramic Capacitor | 0.1 uF | $0.07 | 1 | $0.07 | Mouser |
| DC Power Connector | 2.1 mm (Female) | $1.29 | 1 | $1.29 | Mouser |
| Female Header | 1x8 Pin | $0.70 | 2 | $1.40 | DigiKey |
| Female Header | 1x6 Pin | $0.56 | 1 | $0.56 | DigiKey |
| Male Header | 1x6 Pin | $0.00 | 1 | $0.00 | Unknown |
| Male Header | 2x3 Pin | $0.00 | 1 | $0.00 | Unknown |
Total: $8.52
Tools
 |
This section requires expansion. |
Instructions
|
|
This section requires expansion. |
Circuit
|
|
This section requires expansion. |