Intro to Soldering
 |
This workshop has an archive of past instructions. If you wish to view the contents of those workshops, please look there. |
| Intro to Soldering | |
|---|---|
| |
| Information | |
| Location | CBU |
 |
This workshop is being redone with the addition of an option precursor workshop. Look for changes in the near future. |
Overview
The purpose of this workshop is to educate individuals on how to solder by means of soldering together a predesignated circuit. This does not include the wiring of the circuit, but merely the soldering of the components into a board with the circuit already etched onto it. The circuit board will come from either the Intro to Etching workshop, or bought as a prefabbed board.
Components
| Item | Metric | Cost/Item | Qty | Sub Total | Distributor |
|---|---|---|---|---|---|
| Component Socket | 28 Pin | $0.30 | 1 | $0.30 | Mouser |
| Crystal Oscillator | 16 MHz | $0.55 | 1 | $0.55 | Mouser |
| Resistor | 1 KOhm 1/4 Watt | $0.05 | 1 | $0.05 | Mouser |
| Switch | Momentary Push Switch | $0.13 | 1 | $0.13 | Mouser |
| LM7805 | 5V Regulator | $0.35 | 1 | $0.35 | Mouser |
| Ceramic Disk Capacitor | 22 pF | $0.06 | 2 | $0.12 | Mouser |
| Ceramic Disk Capacitor | 0.01 uF or 10 nF | $0.10 | 1 | $0.10 | Mouser |
| Electrolytic Capacitor | 22 uF | $0.02 | 1 | $0.02 | Mouser |
| ATMega328 Microcontroler | 28Pin (Unbootloaded) | $4.28 | 1 | $4.28 | Mouser |
Total: $5.90
Tools
 |
This section requires expansion. |
Instructions
|
|
This section requires expansion. |
Circuit
|
|
This section requires expansion. |