Belt Disc Sander
| Belt Disc Sander | |
|---|---|
| Information | |
| Owner | Midsouth Makers |
| Tool Category | Tool -> Power Tool |
| Model | Delta SA446 |
| Cost | 0 |
| Status | Available |
| Availability | Anyone may use |
| Labels | |
|
| |
| Media | |
|
| |
| QRCode | |
|
{{#qrcode: http://wiki.midsouthmakers.org/a/Belt_Disc_Sander}} | |
 |
Questions? Talk to Ben or Dan for help or more information. |
Location
Features
Consumables
The disc size is 6" and the belt is 4" by 36". If you break or wear down a belt/disk please replace it.
Allowable Materials
Wood is recommended. Soft plastics and metals can be used but will cause premature belt wear.
Sanded wood must comply with the following rules:
- No moldy or wet wood
- No treated/painted/finished wood
- All nails and staples removed
Safety
- Wear Safety Goggles
- Use Hearing Protection
- Roll long sleeves above the elbow
- Tie back long hair
- Do not wear loose clothing, gloves, neckties or jewelry
- For dusty operations, wear a dust mask
Prior to each use
After each use
- Brush off any sawdust/leftover materials
- Sweep surrounding area
- Return sander back to its location