Motion Threads
Jump to navigation
Jump to search
Main Article: MidsouthMakers_Webcams
Motion Threads
- Each camera in motion (when more than 1) needs it's own thread<number>.conf file
- /etc/motion/thread1.conf
# /usr/local/etc/thread1.conf # # This config file was generated by motion 3.2.12 ########################################################### # Capture device options ############################################################ # Videodevice to be used for capturing (default /dev/video0) # for FreeBSD default is /dev/bktr0 videodevice /dev/video0 # The video input to be used (default: 8) # Should normally be set to 1 for video/TV cards, and 8 for USB cameras input 8 # Draw a user defined text on the images using same options as C function strftime(3) # Default: Not defined = no text # Text is placed in lower left corner text_left CAMERA 1 ############################################################ # Target Directories and filenames For Images And Films # For the options snapshot_, jpeg_, mpeg_ and timelapse_filename # you can use conversion specifiers # %Y = year, %m = month, %d = date, # %H = hour, %M = minute, %S = second, # %v = event, %q = frame number, %t = thread (camera) number, # %D = changed pixels, %N = noise level, # %i and %J = width and height of motion area, # %K and %L = X and Y coordinates of motion center # %C = value defined by text_event # Quotation marks round string are allowed. ############################################################ # Target base directory for pictures and films # Recommended to use absolute patch. (Default: current working directory) target_dir /motion/1.camera.midsouthmakers.org ############################################################ # Live Webcam Server ############################################################ # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 8081 # Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # The filename of the picture is appended as an argument for the command. ;on_picture_save /usr/local/motion-extras/camparse1.pl # Command to be executed when a movie file (.mpg|.avi) is closed. (default: none) # Filename of movie is appended as an argument for the command. ;on_movie_end /usr/local/motion-extras/mpegparse1.pl
- /etc/motion/thread2.conf
# /usr/local/etc/thread2.conf # # This config file was generated by motion 3.2.12 ########################################################### # Capture device options ############################################################ # Videodevice to be used for capturing (default /dev/video0) # for FreeBSD default is /dev/bktr0 videodevice /dev/video1 # The video input to be used (default: 8) # Should normally be set to 1 for video/TV cards, and 8 for USB cameras input 8 # Draw a user defined text on the images using same options as C function strftime(3) # Default: Not defined = no text # Text is placed in lower left corner text_left CAMERA 2 ############################################################ # Target Directories and filenames For Images And Films # For the options snapshot_, jpeg_, mpeg_ and timelapse_filename # you can use conversion specifiers # %Y = year, %m = month, %d = date, # %H = hour, %M = minute, %S = second, # %v = event, %q = frame number, %t = thread (camera) number, # %D = changed pixels, %N = noise level, # %i and %J = width and height of motion area, # %K and %L = X and Y coordinates of motion center # %C = value defined by text_event # Quotation marks round string are allowed. ############################################################ # Target base directory for pictures and films # Recommended to use absolute patch. (Default: current working directory) target_dir /motion/2.camera.midsouthmakers.org ############################################################ # Live Webcam Server ############################################################ # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 8082 # Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # The filename of the picture is appended as an argument for the command. ;on_picture_save /usr/local/motion-extras/camparse2.pl # Command to be executed when a movie file (.mpg|.avi) is closed. (default: none) # Filename of movie is appended as an argument for the command. ;on_movie_end /usr/local/motion-extras/mpegparse2.pl
- /etc/motion/thread3.conf
# /usr/local/etc/thread3.conf # # This config file was generated by motion 3.2.12 ########################################################### # Capture device options ############################################################ # URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///) # Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined netcam_url http://192.168.1.170/img/video.mjpeg # Username and password for network camera (only if required). Default: not defined # Syntax is user:password ; netcam_userpass value # The setting for keep-alive of network socket, should improve performance on compatible net cameras. # 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request. # keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection. # 1.1: Use HTTP/1.1 requests that support keep alive as default. # Default: 1.0 ; netcam_http 1.0 # URL to use for a netcam proxy server, if required, e.g. "http://myproxy". # If a port number other than 80 is needed, use "http://myproxy:1234". # Default: not defined ; netcam_proxy value # Set less strict jpeg checks for network cameras with a poor/buggy firmware. # Default: off netcam_tolerant_check off # Draw a user defined text on the images using same options as C function strftime(3) # Default: Not defined = no text # Text is placed in lower left corner text_left CAMERA 3 ############################################################ # Target Directories and filenames For Images And Films # For the options snapshot_, jpeg_, mpeg_ and timelapse_filename # you can use conversion specifiers # %Y = year, %m = month, %d = date, # %H = hour, %M = minute, %S = second, # %v = event, %q = frame number, %t = thread (camera) number, # %D = changed pixels, %N = noise level, # %i and %J = width and height of motion area, # %K and %L = X and Y coordinates of motion center # %C = value defined by text_event # Quotation marks round string are allowed. ############################################################ # Target base directory for pictures and films # Recommended to use absolute patch. (Default: current working directory) target_dir /motion/3.camera.midsouthmakers.org ############################################################ # Live Webcam Server ############################################################ # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 8083 # Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # The filename of the picture is appended as an argument for the command. ;on_picture_save /usr/local/motion-extras/camparse3.pl # Command to be executed when a movie file (.mpg|.avi) is closed. (default: none) # Filename of movie is appended as an argument for the command. ;on_movie_end /usr/local/motion-extras/mpegparse3.pl
- /etc/motion/thread4.conf
# /usr/local/etc/thread3.conf # # This config file was generated by motion 3.2.12 ########################################################### # Capture device options ############################################################ # URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///) # Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined netcam_url http://192.168.1.171/img/video.mjpeg # Username and password for network camera (only if required). Default: not defined # Syntax is user:password ; netcam_userpass value # The setting for keep-alive of network socket, should improve performance on compatible net cameras. # 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request. # keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection. # 1.1: Use HTTP/1.1 requests that support keep alive as default. # Default: 1.0 ; netcam_http 1.0 # URL to use for a netcam proxy server, if required, e.g. "http://myproxy". # If a port number other than 80 is needed, use "http://myproxy:1234". # Default: not defined ; netcam_proxy value # Set less strict jpeg checks for network cameras with a poor/buggy firmware. # Default: off netcam_tolerant_check off # Draw a user defined text on the images using same options as C function strftime(3) # Default: Not defined = no text # Text is placed in lower left corner text_left CAMERA 4 ############################################################ # Target Directories and filenames For Images And Films # For the options snapshot_, jpeg_, mpeg_ and timelapse_filename # you can use conversion specifiers # %Y = year, %m = month, %d = date, # %H = hour, %M = minute, %S = second, # %v = event, %q = frame number, %t = thread (camera) number, # %D = changed pixels, %N = noise level, # %i and %J = width and height of motion area, # %K and %L = X and Y coordinates of motion center # %C = value defined by text_event # Quotation marks round string are allowed. ############################################################ # Target base directory for pictures and films # Recommended to use absolute patch. (Default: current working directory) target_dir /motion/4.camera.midsouthmakers.org ############################################################ # Live Webcam Server ############################################################ # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 8084 # Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # The filename of the picture is appended as an argument for the command. ;on_picture_save /usr/local/motion-extras/camparse3.pl # Command to be executed when a movie file (.mpg|.avi) is closed. (default: none) # Filename of movie is appended as an argument for the command. ;on_movie_end /usr/local/motion-extras/mpegparse3.pl
- /etc/motion/thread5.conf
# /usr/local/etc/t:wqhread3.conf # # This config file was generated by motion 3.2.12 ########################################################### # Capture device options ############################################################ # URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///) # Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined netcam_url http://192.168.1.172/img/video.mjpeg # Username and password for network camera (only if required). Default: not defined # Syntax is user:password ; netcam_userpass value # The setting for keep-alive of network socket, should improve performance on compatible net cameras. # 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request. # keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection. # 1.1: Use HTTP/1.1 requests that support keep alive as default. # Default: 1.0 ; netcam_http 1.0 # URL to use for a netcam proxy server, if required, e.g. "http://myproxy". # If a port number other than 80 is needed, use "http://myproxy:1234". # Default: not defined ; netcam_proxy value # Set less strict jpeg checks for network cameras with a poor/buggy firmware. # Default: off netcam_tolerant_check off # Draw a user defined text on the images using same options as C function strftime(3) # Default: Not defined = no text # Text is placed in lower left corner text_left CAMERA 5 ############################################################ # Target Directories and filenames For Images And Films # For the options snapshot_, jpeg_, mpeg_ and timelapse_filename # you can use conversion specifiers # %Y = year, %m = month, %d = date, # %H = hour, %M = minute, %S = second, # %v = event, %q = frame number, %t = thread (camera) number, # %D = changed pixels, %N = noise level, # %i and %J = width and height of motion area, # %K and %L = X and Y coordinates of motion center # %C = value defined by text_event # Quotation marks round string are allowed. ############################################################ # Target base directory for pictures and films # Recommended to use absolute patch. (Default: current working directory) target_dir /motion/5.camera.midsouthmakers.org ############################################################ # Live Webcam Server ############################################################ # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 8085 # Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # The filename of the picture is appended as an argument for the command. ;on_picture_save /usr/local/motion-extras/camparse3.pl # Command to be executed when a movie file (.mpg|.avi) is closed. (default: none) # Filename of movie is appended as an argument for the command. ;on_movie_end /usr/local/motion-extras/mpegparse3.pl