Difference between revisions of "Shop Log"

From MidsouthMakers - Memphis Area Hackerpace
Jump to navigation Jump to search
(Created page with "== Shop Communication Log == Feel free to add any comments, concerns or notes, If you are hesitant to modify the page, feel free to add your entries to the Talk:Shop LogDis...")
 
Line 1: Line 1:
 
== Shop Communication Log ==
 
== Shop Communication Log ==
 
   
 
   
Feel free to add any comments, concerns or notes, If you are hesitant to modify the page, feel free to add your entries to the [[Talk:Shop Log]]Discussion page, with whatever needs to be added. We'll add it to the log for you.
+
Feel free to add any comments, concerns or notes, If you are hesitant to modify the page, feel free to add your entries to the [[[http://wiki.midsouthmakers.org/index.php?title=Talk:Shop_Log&action=edit&redlink=1 Discussion Page]]], with whatever needs to be added. We'll add it to the log for you.
 
----
 
----
 
===04.10.2011===
 
===04.10.2011===

Revision as of 01:16, 11 April 2011

Shop Communication Log

Feel free to add any comments, concerns or notes, If you are hesitant to modify the page, feel free to add your entries to the [[Discussion Page]], with whatever needs to be added. We'll add it to the log for you.


04.10.2011

Shop Clean Up day- We were able to clean up a good portion of the mezzanine- the rear area in the shop above the storage rooms. We organized the top right section. Currently in the right hand corner we have some large intact sheets of Plexiglas and some cabinets as well. We then moved about 10-15 full size doors and stacked them immediately to the left of the cabinets. Continuing to the left, you'll find several 1"-2" thick sheets of Styrofoam in addition to several "Fire Exit" signs with strobe lights and multiple coffee decanters. We placed the large air conditioner unit on a pallet for easier removal. We now have half of the rear shelves cleared with bench-top access and cabinets. We stored some aluminum planks and sheet metal sections in the left hand cabinets. Be careful with the accursed turkey leg!

If you find yourself on the mezzanine, you will need to watch your step, in the middle section, the first 1/3 of the flooring is solid, but the rear 2/3 of the wood floor is starting to show wear and WILL BOW under normal weight. We currently have some metal wall units over the area and will eventually cover/replace the sections with more sound material.

We were able to get most of the large wood pile moved from the rear corner, it's now relatively sorted in front of the unused roll-up door.

We were not able to fully accomplish what we intended, but we made some serious headway.

Important Items Remaining

  • Move the pile of wood (planks/2x4/etc) from in front of the primary roll-up doors to a more out of the way location on the right hand side of the shop, so the floor space on the left hand side of the shop is clear again

Items remaining

  • Finish moving the remaining doors from the right rear corner to the right hand side of the mezzanine
  • Move the now empty metal shelf from the left hand corner of the shop to the right rear corner
  • Move the large stack of Plexiglas from the desktop to the metal shelf
  • Move the smaller stack of Plexiglas from the small shelving unit near the desk to the metal shelf
  • Move the pile of wood (planks/2x4/etc) and place on the metal shelf
  • Move the large wall panels to the mezzanine or store along the right hand wall.
  • Check with Mr. Leath and see if we can use some of the newer cabinets/shelving units in the house