Sand Blasting Cabinet
| Sand Blasting Cabinet | |
|---|---|
The outside corner of the finished cabinet | |
| Information | |
| Owner | JWoodJr[[Category:JWoodJr's projects]] |
| Version | 1.0 |
| Status | In Progress |
| Started On | December 2009 |
| Cost | $?? |
Overview
This was created due to a need for a sand blasting cabinet for a very cheap expense. Followed an idea posted on Instructables.com and implemented some modifications for my purpose. I installed a filtered outlet port as well as mounted a regulator/filter on the outside. There is a feed line for the air and a feed line for the actual blasting media of choice. So far I've worked with aluminum oxide and pla-sand. My initial desires are to use this in conjunction with a vinyl cutter to develop designs, place on glass then sand blast the negative space to etch the design into the glass.
Features
- Portable
- Ease of use and construction
- Easy to reclaim used media for multiple blastings
- Easy to modify for future add-ons
Implemented
- Sand blasting cabinet made from storage tub
Incomplete
- Easier method for viewing panel replacement
Components
- Storage Tub
- Air Compressor
- Sand Blaster
- Air Regulator
- Vinyl Cutter
Cost of Materials
- Air Compressor = $75
- Air Regulator/Filter = $15
- Storage Tub = $4
- Air Hose = $15
- Sand Blaster Bucket and Gun = $24
- Misc. Air Hose Quick Connect Ends = $6
- Plexiglass Sheet = $7
- Liquid Nails = $4
- Fluorescent Work Light = $10
- Closet Flange Spacers (4) = $12
- Sandblasting Gloves = $7
- Misc nuts & Bolts = $6
Tools Used for Construction
- Hot Knife
- Dremel
- Drill
- Pliers
- Wrenches
- Thread Seal
Categories:
- User projects
- Projects containing Storage Tub
- Projects containing Air Compressor
- Projects containing Sand Blaster
- Projects containing Air Regulator
- Projects containing Vinyl Cutter
- Projects using Hot Knife
- Projects using Dremel
- Projects using Drill
- Projects using Pliers
- Projects using Wrenches
- Projects using Thread Seal
- JWoodjr's projects