Difference between revisions of "Sand Blasting Cabinet"

From MidsouthMakers - Memphis Area Hackerpace
Jump to navigation Jump to search
Line 12: Line 12:
  
 
== Overview ==
 
== Overview ==
This was created due to a need for a sand blasting cabinet for a very cheap expense. Followed an idea posted on Instructables.com and implemented some modifications for my purpose. I installed a filtered outlet port as well as mounted a regulator/filter on the outside. There is a feed line for the air and a feed line for the actual blasting media of choice. So far I've worked with aluminum oxide and pla-sand.
+
This was created due to a need for a sand blasting cabinet for a very cheap expense. Followed an idea posted on Instructables.com and implemented some modifications for my purpose. I installed a filtered outlet port as well as mounted a regulator/filter on the outside. There is a feed line for the air and a feed line for the actual blasting media of choice. So far I've worked with aluminum oxide and pla-sand. My initial desires are to use this in conjunction with a [[vinyl cutter]] to develop designs, place on glass then sand blast the negative space to etch the design into the glass.
  
 
== Features ==
 
== Features ==
Line 28: Line 28:
 
=== Incomplete ===
 
=== Incomplete ===
 
* Easier method for viewing panel replacement
 
* Easier method for viewing panel replacement
 +
 +
== Components ==
 +
* {{project component|Storage Tub}}
 +
* {{project component|Air Compressor}}
 +
* {{project component|Sand Blaster}}
 +
* {{project component|Air Regulator}}
 +
* {{project component|Vinyl Cutter}}
 +
 +
== Cost of Materials ==
 +
* Air Compressor = $75
 +
* Air Regulator/Filter = $15
 +
* Storage Tub = $4
 +
* Air Hose = $15
 +
* Sand Blaster Bucket and Gun = $24
 +
* Misc. Air Hose Quick Connect Ends = $6
 +
* Plexiglass Sheet = $7
 +
* Liquid Nails = $4
 +
* Fluorescent Work Light = $10
 +
* Closet Flange Spacers (4) = $12
 +
* Sandblasting Gloves = $7
 +
* Misc nuts & Bolts = $6
 +
 +
== Tools Used for Construction ==
 +
* Hot Knife
 +
* Dremel
 +
* Drill
 +
* Pliers/Wrenches
 +
* Thread Seal/Teflon Tape
  
  
 
[[Category:JWoodJr's projects]]
 
[[Category:JWoodJr's projects]]

Revision as of 19:54, 26 January 2010

Sand Blasting Cabinet

The outside corner of the finished cabinet

Information
Owner JWoodJr[[Category:JWoodJr's projects]]
Version 1.0
Status In Progress
Started On December 2009
Cost $??


Overview

This was created due to a need for a sand blasting cabinet for a very cheap expense. Followed an idea posted on Instructables.com and implemented some modifications for my purpose. I installed a filtered outlet port as well as mounted a regulator/filter on the outside. There is a feed line for the air and a feed line for the actual blasting media of choice. So far I've worked with aluminum oxide and pla-sand. My initial desires are to use this in conjunction with a vinyl cutter to develop designs, place on glass then sand blast the negative space to etch the design into the glass.

Features

  • Portable
  • Ease of use and construction
  • Easy to reclaim used media for multiple blastings
  • Easy to modify for future add-ons

Implemented

  • Sand blasting cabinet made from storage tub
This is a shot of the inside of the cabinet after its initial blasting

Incomplete

  • Easier method for viewing panel replacement

Components

  • Storage Tub
  • Air Compressor
  • Sand Blaster
  • Air Regulator
  • Vinyl Cutter

Cost of Materials

  • Air Compressor = $75
  • Air Regulator/Filter = $15
  • Storage Tub = $4
  • Air Hose = $15
  • Sand Blaster Bucket and Gun = $24
  • Misc. Air Hose Quick Connect Ends = $6
  • Plexiglass Sheet = $7
  • Liquid Nails = $4
  • Fluorescent Work Light = $10
  • Closet Flange Spacers (4) = $12
  • Sandblasting Gloves = $7
  • Misc nuts & Bolts = $6

Tools Used for Construction

  • Hot Knife
  • Dremel
  • Drill
  • Pliers/Wrenches
  • Thread Seal/Teflon Tape